low-pressure formula (prevents deformation of frames)
ambient temperature: from + 5 ° C to + 30 ° C
can temperature: from + 10 ° C to + 30 ° C
efficiency: up to 65 l
pre-treatment time: ≤ 30 min.
volume increase (post-expansion): from 70% to 100%
Shelf life: 18 months
Too cold can should be brought to room temperature, e.g. by immersion in warm water with temperature up to +30°C or leaving it in room temperature for at least 24 h.
The foam should not be used in spaces without access of fresh air and poorly ventilated or in places exposed to direct sunlight.
Vigorously shake the can ,10-20 seconds, the valve facing down
Put on protective gloves
Ensure all surfaces are clean and free from dust
Surfaces to be sealed moisten with water
Screw the can onto the applicator
Always use upside down
After drying, cut off the excess foam with a knife or sharp tool
Any stains, dirt’s foam can be removed while still wet with FIX 46 cleaner