45 Low Expansion Premium Foam Straw
What is Low Expansion Premium Foam Straw ?
45 Low Expansion Premium Foam Straw is one-component polyurethane foam with straw applicator hardening due to air humidity. The foam is manufactured in compliance with requirements of ISO 9001:2008 standard.
This foam has an application straw so you don’t have to buy a gun.
How Does Low Expansion Premium Foam Straw differ from High Expansion Foam ?
Low Expanding Fix46 Supplier 45 Premium Foam Straw expands to a smaller extent. By using low expanding foam, you avoid spreading too much.
How Does Low Expansion Premium Foam Straw differ from ordinary foams ?
Fix46 Supplier 45 Low Expansion Premium Foam Straw has better thermal insulation properties than ordinary foams, so it is worth using it to seal and supplement insulation layers made of foamed polystyrene, PIR boards and XPS polystyrene. Fix46 Supplier 45 Low Expansion Premium Foam Straw outperforms ordinary foams also in terms of sound insulation. Fix46 Supplier 45 Low Expansion Premium Foam Straw is resistant to fungi and mould, it is also not liked by insects and rodents. “Does not age”, i.e. despite the passage of time it does not change its mechanical and insulation parameters. Therefore is easier to transport, process and assemble than ordinary foams.
Where to use Low Expansion Premium Foam Straw?
45 Low Expansion Premium Foam Straw is a high quality straw polyurethane foam with excellent filling and sealing properties. Ergonomic and precise straw applicator enables you to apply foam with just one hand, using very little force, and gives you full control over foam flow, like a professional gun applicator. 45 Low Expansion Premium Foam Straw is designed for installing windows and doors, gluing and insulating wall panels, corrugated sheets, roof tiles, etc., joining wooden elements in skeletal structures, filling gaps between polystyrene boards for thermal services of buildings, sealing and soundproofing of partition walls, thermal insulation & acoustic insulation.
How to use Low Expansion Premium Foam Straw ?
Shake the can vigorously about 20 times, Put on protective gloves, Ensure all surfaces are clean and free from dust, Surfaces to be sealed moisten with water, Carefully affix nozzle, Always use upside down, Do not fill the entire gap – the foam will increase in volume, After drying, cut off the excess foam with a knife or sharp tool. Any stains, dirt foam can be removed while still wet with FIX 46 Supplier cleaner
Before applications always read safety instruction: TDS & MSDS presented on www.fix46.ie
